Dining Tables
For chandeliers above dining tables, the recommended fixture diameter is
Recommended Fixture Diameter → 1/2–2/3 of Table Width
A small pendant centred on a hand-cut alabaster dome with a smaller alabaster globe suspended inside — the globe holds the bulb, sits a touch below the dome's open rim, and casts a warm glow through two layers of natural stone. The brass armature, ceiling canopy, and adjustable stem are warm-toned, hand-finished metal. Each piece of alabaster carries its own veining, translucence, and small fissures unique to that block of stone — no two pendants are the same. Available in two sizes: Small at ∅ 6.3″ × H 4.7″ (∅ 16 × H 12 cm) or Large at ∅ 9.1″ × H 6.3″ (∅ 23 × H 16 cm).
Two layers of hand-cut alabaster diffuse the bulb into a warm, even glow with no hotspot.
Hand-finished warm-tone brass armature with a 1 m sectional rod drop and a small ceiling canopy.
Every block of alabaster veins differently. The piece you receive will be uniquely figured.
| Size | Dimensions | Best for |
|---|---|---|
| Small | ∅ 6.3″ × H 4.7″ (∅ 16 × H 12 cm) | Single pendant beside a bed or sofa, accent over a small console, cluster of multiples above a counter |
| Large | ∅ 9.1″ × H 6.3″ (∅ 23 × H 16 cm) | Centerpiece over a side table, single drop over an entryway console, dining table accent in a small dining nook |
2 SKUs — single alabaster + brass configuration in two scales. Both sizes show the dome dimensions only; the brass rod drop is set on install from the included sectional rod. For dining-table use, hang the bottom of the dome 30–36 inches above the table top.
All sizes ship with a 1 m (39.4″) extension rod as standard. It is supplied as three screw-together sections, so the drop can be set on site by fitting only the sections you need — no cutting required:
Fitting fewer sections gives a drop of 20, 30, 50, 70 or 80 cm. Longer rods are available on request — with your ceiling height before ordering.
Alabaster is a soft, porous natural stone. Liquid cleaners, water, soap, vinegar, and citrus all damage alabaster — they soak into the surface, stain it permanently, dull the natural translucence, and can etch the polished finish. Clean only with a soft, dry cloth or a clean soft-bristle brush. Never use abrasive pads, scouring powders, or solvents either. The brass armature can be wiped with a slightly damp cloth followed by a dry cloth; keep moisture away from the stone.
Each dome and globe is cut and turned by hand from a block of natural alabaster. The veining, translucence, micro-fissures, and small variations in colour vary from piece to piece — that's the nature of the stone, not a defect. Some blocks read warmer and creamier; others lean cooler and more grey-veined. The piece you receive will sit in the same design family as the photos but will not be a pixel-perfect match.
The pendant uses a standard G9 base bulb, housed inside the alabaster globe. Light passes through the globe's stone wall first, then through the dome above, giving a doubly-diffused soft warm glow with no harsh hotspot. We recommend a warm-white (2700–3000K) G9 bulb. The bulb is user-replaceable — no bulb is included.
The brass stem, canopy, and dome-to-globe joint are hand-finished in a warm raw tone that will develop a soft patina over years of normal use — the surface darkens slightly and the warmth deepens. If you prefer a polished bright look, wipe with a soft dry cloth as part of regular dusting; if you prefer the patina, leave it. Either way, avoid abrasive metal polishes — they can scratch the brass and risk depositing residue on the alabaster. For project quantities or a custom rod drop length, before ordering.
Official dimension sheets for both sizes. Click to enlarge.
Multi-Head Cluster SizesCluster configurations from 3 to 15 heads. Click any diagram to enlarge.
| Dimensions — Small (shade only) | ∅ 6.3″ × H 4.7″ (∅ 16 × H 12 cm) |
| Dimensions — Large (shade only) | ∅ 9.1″ × H 6.3″ (∅ 23 × H 16 cm) |
| Material — shade | Hand-cut natural alabaster — hemispherical dome over a suspended alabaster globe |
| Material — armature | Hand-finished raw brass (stem, canopy, dome-to-globe joint) |
| Extension rod (included, all sizes) | 1 m / 39.4″ total — sectional brass rod supplied in three pieces: 20 cm + 30 cm + 50 cm (7.9″ + 11.8″ + 19.7″). Fit fewer sections for a shorter drop; longer rods on request. |
| Light source | G9 base · warm-white 2700–3000K G9 bulb recommended · user-replaceable · bulb not included |
| Care | Soft dry cloth only. Never use water, soap, vinegar, citrus, abrasive pads, or solvents on the alabaster — they stain and etch permanently. |
| Voltage | 120V (AC 110–240V global) |
| Mount | Hardwired pendant to a standard ceiling junction box, indoor dry locations only |
| Suitable spaces | Bedroom, living room, entryway, small dining area, accent niche — indoor dry only |
| Certification | Listed · North America · CE · SAA · SASO · KC |
Every Starnagel order is carefully prepared before beginning its journey to your home.
Order processing typically takes 1–5 business days, followed by an estimated 27–37 business days in transit.
The total estimated delivery timeframe is 28–42 business days.
Standard shipping is complimentary on U.S. orders. If any special shipping charges apply, our customer care team will let you know in advance.
Once your order has shipped, you will receive a confirmation email with tracking information.
We want you to feel confident bringing Starnagel lighting into your home.
Returns may be requested within 30 days of delivery, provided the item is unused, uninstalled, and returned in its original condition and packaging with proof of purchase.
If your lighting arrives damaged, defective, or incorrect, please contact us as soon as possible. If the issue is confirmed to be our responsibility, we will work with you to resolve it and provide a prepaid return label when a return is required.
Once an approved return has been received and inspected, refunds are issued to the original payment method within 10 business days.
Two simple guidelines to help you find the perfect fit.
Every fixture is checked before packing for alignment, finish and visible details.
Custom-fitted internal protection helps keep components secure during transit.
Larger or more delicate fixtures receive additional outer protection where needed.