Brevin Wood Wall Sconce
A solid wood disk — turned and softened at the edges into a low cushion shape — mounts flat to the wall, with a single frosted glass globe set into its center and stepping forward from the disk face. The glass diffuses the bulb behind it into a calm, even sphere of warm light: no hotspot, no glare, no visible filament. The wood is finished in a clear water-based varnish that keeps the natural grain open and visible, so the disk reads as a piece of wood rather than a painted object. Sized at 25 cm overall with an 18 cm globe and a 14 cm projection from the wall, the Brevin works at scale beside a bed, beside a hallway mirror, on a stair landing, or as a paired set down a passage.
At a glance
Solid Wood Disk
Hand-turned from a single block, edges softened into a cushion form — mounts flush against the wall.
Frosted Glass Globe
Diffuses the bulb into a calm, even sphere of light — no hotspot, no visible filament.
Standard E26 Bulb
Takes one E26 medium-base bulb — easy to replace, easy to swap color temperature.
Each disk is one of a kind
The wood is solid, hand-shaped, and hand-finished. Grain pattern, knot placement, and the depth of the natural color all shift block by block. The supplier also notes that overall dimensions can vary by 1–3 cm between pieces, since each disk is measured by hand. Your sconce will share the same character as the photo, but the exact grain and proportions will be unique to your piece.
Hardwired — connects to standard junction box
The Brevin mounts to a standard US wall junction box and wires into your home's 110–240V supply. We recommend a licensed electrician for installation; estimate 20–30 minutes per fixture for an experienced installer.
Dimensions
Click to enlarge ↗
- Wood disk diameterØ 25 cm / 9.8"
- Glass globe diameterØ 18 cm / 7.1"
- Wall projection14 cm / 5.5"
- Hand-measurement tolerance± 1–3 cm
Detailed scale drawing — coming soon
Bulb
1× E26 medium base
One E26 medium-base bulb, up to 60 W (or LED equivalent). Bulb not included.
| Fixture type |
Wall sconce |
| Disk material |
Solid natural wood (clear water-based varnish) |
| Shade material |
Frosted glass globe |
| Disk diameter |
Ø 25 cm / Ø 9.8" |
| Globe diameter |
Ø 18 cm / Ø 7.1" |
| Wall projection |
14 cm / 5.5" |
| Light source |
1× E26 medium base (E27 compatible) |
| Max wattage |
60 W (or LED equivalent) |
| Bulb included |
No |
| Wiring |
Hardwired — connects to standard wall junction box |
| Voltage |
110–240 V (universal) |
| Certification |
ETL listed — compatible with North America |
| Tolerance |
Hand-measured — 1–3 cm variation between pieces |
| Recommended rooms |
Bedroom, study, hallway, stair landing |
| Use environment |
Indoor, dry locations only |
Installation
- Hardwired install. Mounts to a standard US wall junction box; licensed electrician recommended.
- Turn off power at the breaker before opening the existing junction box. Verify with a voltage tester.
- Connect black to black (line), white to white (neutral), and ground to the green or bare copper wire from the box.
- Secure the wood mounting plate to the junction box with the supplied screws, then attach the lower assembly with the included thumb-screws or twist-lock fitting.
- One E26 bulb, sold separately. Recommended: 2700–3000K warm white LED, 60 W max equivalent.
- For dimming, pair with a dimmable LED bulb on a compatible wall dimmer switch (replace the existing wall switch on the same circuit).
- For indoor use only. Not suitable for bathrooms, outdoor, or other damp locations.
Resources
Frequently asked
