This sculptural chandelier scatters dozens of hand-carved composite discs across a gold-finished metal frame, layered like petals or coconut shell pieces in a dome silhouette. It measures ∅ 32.3″ x H 21.7″ (∅ 82 x H 55 cm) and hangs from an adjustable chain, sized for a dining table, foyer, or living room. Pick matte white, matte black, or cream to match your room.
Color — choose oneMatte WhiteMatte BlackCream
Features
Hand-carved discs
Dozens of small composite discs layer across the frame, each shaped and sanded by hand.
Domed silhouette
The disc cluster opens downward in a wide dome ∅ 32.3″ across, casting warm light across the table.
Adjustable chain drop
Gold chain trims on site to set your drop height, with a 6.3″ canopy at the ceiling.
Handmade varianceEach piece is hand-finished
The discs are carved, sanded, and finished by hand, so every chandelier shows minor surface marks and slight tonal variation across the discs. These are characteristics of the craft, not defects. If you prefer a perfectly uniform machine finish, this piece may not be the right fit — with any questions before ordering.
BulbsNine E14 bulbs sold separately
Uses 9 standard E14 (small Edison screw) bulbs at 5W each. The fixture is designed for warm-white 3000K LED bulbs; matching color tone across all 9 sockets gives the most cohesive glow. Bulbs are not included.
FinishGold frame, three disc colors
Gold-finished metal frame across all three SKUs — only the disc color changes. For project quantities or a longer chain drop, before ordering.
Shape Diagrams
Official dimension sheet (shared across all three colors). Click to enlarge.
Click to view full size ↗
| Dimensions |
∅ 32.3″ x H 21.7″ (∅ 82 x H 55 cm) |
| Canopy |
∅ 6.3″ (16 cm) |
| Material |
Gypsum-Resin Composite, Metal |
| Color |
Matte White, Matte Black, or Cream (select above) |
| Frame finish |
Gold |
| Craft |
Hand-carved and hand-sanded discs |
| Light source |
9 × E14 sockets · 5W each · bulbs sold separately |
| Color temperature |
3000K warm-white recommended |
| Voltage |
120V (AC 110–240V global) |
| Drop |
Adjustable gold chain, trimmable on site |
| Mount |
Hardwired ceiling junction box, indoor dry locations |
| Certification |
Listed · North America · CE · SAA · SASO · KC |
Installation Notes
- Hardwired to a standard ceiling junction box; we recommend a licensed electrician.
- Unpack carefully — the composite discs are individually attached and can chip if knocked against the box.
- Trim the chain to set your drop height before final installation.
- Install 9 E14 bulbs at 5W each, warm-white 3000K LED recommended. Do not exceed the rated wattage on the fixture label.
- Center over a dining table, hung roughly 30–36″ above the surface, or at least 7 ft above the floor in open areas.
- Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
- Dust the discs with a soft brush; avoid wet cleaning, which can mark the composite surface.
Downloads & Resources
