A swing-arm wall sconce with a small cone shade and a discreet pull-cord switch — finished in glossy painted iron across the shade, arm, and slim baseplate. The articulated arm extends in two segments (30 + 20 cm), so the cone can sit close against the wall or reach about 20″ (50 cm) into the room as a directional reading light beside a bed, sofa, or armchair. ∅ 25 cm shade, hardwired to a standard junction box behind a 6 × 25 cm rectangular baseplate. Available in three colors: Matte Black, Orange, or Cherry Red. One E27 socket; bulb sold separately.
Features
Two-segment swing arm
30 + 20 cm articulated arm — fold flat against the wall or swing out to about 50 cm reach.
Cone shade + pull cord
Compact cone with a thin pull-cord switch hanging from the side — no wall switch required.
Painted iron, three colors
Glossy enamel finish across the shade, arm, and baseplate — uniform color, durable, easy to wipe.
BulbE27 bulb sold separately
The cone shade hides one standard E27 (Edison screw) socket. The bulb is not included so you can match your preferred color temperature. We recommend a warm-white LED at 2700–3000K, around 400–600 lumens for a reading-light feel, in a standard A-shape bulb up to 40W equivalent. The cone directs light downward, so a small omnidirectional bulb works well — a globe or filament-style LED is visible from below and looks good unlit.
Swing armTwo-segment articulated arm — fold flat or reach out
The arm is built from two segments — a 30 cm inner section hinged at the baseplate, and a 20 cm outer section hinged where the cone attaches. Each joint pivots independently, so the shade can rest close to the wall, swing out to about 50 cm reach, or angle in any direction along the wall. The joints hold their position by friction; adjust by hand, let go, and the arm stays where you put it. Don't force past the natural travel range.
SwitchPull-cord on the shade — no wall switch required
A thin braided pull-cord hangs from the side of the cone shade. A short tug turns the lamp on; another tug turns it off. Useful when the lamp is mounted in a spot without convenient wall-switch wiring — beside a bed, in a hallway alcove, or in a guest room. The pull-cord operates independently of the swing arm position, so brightness control stays at the cone wherever you swing it.
FinishGlossy painted iron, uniform per SKU
Each sconce is welded from iron tubing and sheet, then finished in glossy enamel paint — the shade, arm, and baseplate all wear the same color. The paint is durable in normal use but can chip if knocked hard against a wall or doorway during install. Small chips can be touched up with matching enamel paint from a hardware store. For project quantities or a custom color (single piece minimum on custom), before ordering.
Shape Diagram
Official dimension sheet. All three colors share the same dimensions. Click to enlarge.
Click to view full size ↗
| Shade dimensions |
∅ 9.8″ × H 7.5″ (∅ 25 × H 19 cm) |
| Baseplate |
W 2.4″ × L 9.8″ (W 6 × L 25 cm) |
| Arm |
L 11.8″ + 7.9″ (L 30 + 20 cm) · two-segment articulated · ~50 cm max reach |
| Colors |
Matte Black · Orange · Cherry Red (glossy painted iron) |
| Material |
Welded iron tubing and sheet · glossy enamel paint |
| Light source |
1 × E27 socket · bulb sold separately · max 40W equivalent |
| Switch |
Pull-cord on shade · no wall switch required |
| Voltage |
120V (AC 110–240V global) |
| Mount |
Hardwired to standard wall junction box, indoor dry locations |
| Suitable spaces |
Bedside, reading nook, hallway, beside sofa or armchair, guest room |
| Certification |
Listed · North America · CE · SAA · SASO · KC |
Downloads & Resources
Setup Notes
- Hardwired to a standard wall junction box behind the baseplate — we recommend a licensed electrician for installation.
- Plan the mount height so the pull-cord hangs within easy reach when seated or standing where the sconce will be used (typically 130–150 cm from the floor for a bedside or armchair sconce).
- Allow clearance for the swing arm: about 50 cm out from the wall at maximum reach, plus the cone's 25 cm diameter at the tip. Don't install in a tight corner where the arm can't extend.
- Unpack carefully — the painted enamel finish is durable but can chip if knocked against a wall corner or doorway during install. Lift the sconce by the baseplate or the arm hinge, not by the shade or the pull-cord.
- Install one E27 bulb up to 40W equivalent — a warm-white LED at 2700–3000K, 400–600 lumens, suits the reading-light use. Do not exceed the rated wattage.
- Indoor dry locations only — not rated for bathrooms, kitchens with steam exposure, covered porches, or outdoor use.
- Adjust the two arm segments by hand. The hinges hold position through friction; gentle adjustment is all the lamp asks for. Don't force the arm past its natural travel range — that can loosen the joints over time.
- Wipe the painted finish with a soft, dry cloth as needed. The pull-cord can be wiped with a slightly damp cloth and dried promptly. For paint chips, touch up with a matching enamel paint from a hardware store.
