A wall sconce that pairs two of the most honest materials in interiors — natural marble and opal glass. A solid marble disc mounts flush to the wall; a frosted glass globe sits half-proud of the stone face, catching and scattering the G9 light source within. The combination is minimal without being cold: the stone's natural veining gives each piece a slightly different character, and the opal globe softens the light into a warm, even glow. Available in Black Marble, Indian Green Marble, and Carrara White.
Hardwired wall install
This sconce hardwires directly to a wall junction box — it is not plug-in. A licensed electrician is recommended. Always turn off power at the breaker before installation.
G9 bulb — sold separately · please read before ordering
This sconce uses a G9 bi-pin base, which is less common in North American hardware stores than E26. G9 LED capsules are widely available online — Amazon, Home Depot's website, and lighting specialty retailers all carry them. Search "G9 LED warm white 3W" or "G9 LED 5W" and you will find plenty of options. We recommend ≤5W at 2700–3000K warm white. if you need sourcing help.
Features
Natural marble backplate
A solid marble disc — each piece carries unique natural veining that no two sconces share exactly.
Opal glass globe
Frosted opal glass diffuses the G9 source evenly — a warm, consistent glow with no visible hotspot or filament.
3 marble finishes
Black · Indian Green · Carrara White — each stone finish reads differently against a wall.
G9 · replaceable
Standard G9 bi-pin socket — replace the capsule bulb when needed. Bulb sold separately.
Compact · versatile
W140 × H190 mm — a scale that works in corridors, bedrooms, bathrooms, and beside mirrors.
Universal voltage
AC 110–240 V · 50/60 Hz — certified for North America, Saudi Arabia, Europe, and Australia.
Size & FittingOne size
W 5.5″ (140 mm) · H 7.5″ (190 mm) · hardwired wall mount
G9 bi-pin fitting
Bulb sold separately. Recommended: G9 LED capsule ≤5W · 2700–3000K warm white. Dimmable with a compatible G9 LED + Triac dimmer switch.
Marble Finish
Black Marble
Deep matte black with subtle grey and silver veining — the most dramatic of the three. Works as a strong graphic accent against white or light-coloured walls, or disappears elegantly into a dark-painted room.
Indian Green Marble
Deep forest green with white and silver veining — a bold, jewel-toned stone that works as an accent in neutral or dark-walled rooms.
Carrara White Marble
Classic white-grey with fine grey veining — the most timeless and versatile of the three, at home in almost any interior palette.
Dimensions
Click the diagram to enlarge.
×W 5.5″ (140 mm) · H 7.5″ (190 mm)🔍 Tap the image to enlarge
| Materials |
Natural marble backplate · Opal frosted glass globe |
| Finishes |
Black Marble · Indian Green Marble · Carrara White Marble |
| Dimensions |
W 5.5″ (140 mm) · H 7.5″ (190 mm) |
| Light source |
G9 bi-pin · bulb sold separately · recommended ≤5W LED, 2700–3000K |
| Switch |
Hardwired (wall switch) |
| Mounting |
Hardwired wall mount (junction box required) |
| Voltage |
AC 110–240 V · 50/60 Hz |
| IP rating |
IP20 — indoor dry locations only |
| Dimmable |
Yes — with a dimmable G9 LED capsule and a compatible Triac dimmer switch |
| Certification |
Compatible with North America, Saudi Arabia, Europe, and Australia |
| Best for |
Bedroom, corridor, bathroom vanity, beside mirror — minimalist, Japandi, and luxury interiors |
Installation & Care
- Switch off power at the breaker before installation. A licensed electrician is recommended for hardwired wall connection to the junction box.
- Mount the marble backplate to the wall over the junction box using the included hardware. The backplate sits flush to the wall surface.
- Insert a G9 LED capsule (sold separately, ≤5W recommended) into the G9 socket. Do not exceed the socket's maximum wattage. For dimming, use a dimmable G9 LED and pair with a Triac-compatible wall dimmer switch.
- Attach the opal glass globe and restore power. The wall switch controls the sconce.
- Wipe the marble backplate with a dry or barely damp microfiber cloth — avoid acidic cleaners, which can etch natural stone surfaces. Clean the opal glass globe with a dry soft cloth. Do not submerge either component in water.
Downloads & Resources
FAQs
