A walnut-wood wall sconce that magnetically detaches into a portable handheld light. The lamp body lifts off the wall plate with a gentle pull — use it as a fixed sconce when mounted, or carry it as a wand for late-night hallways, closets, or bedside reading. Battery-powered with USB-C charging and 4-hour runtime. Touch sensor on the wood handle switches between three color temperatures (3000K / 4000K / 6000K) and dims by hold. No wiring, no electrician — mount the plate with screws or adhesive.
⚠ What this lamp is — and what it isn't
Ambient and accent light, not main illumination. The integrated 1W LED produces nightlight-to-low-ambient brightness — bright enough to navigate a dark hallway, find your way to the bathroom, or set evening mood, but not bright enough to read a book by alone.
For reading, pair it with a primary reading lamp. For mood lighting, ambient hallway use, or as a portable emergency light, this is its purpose.
Features
Magnetic detach
Pull the wand off the wall plate at any time — carry it to bed, hallway, or closet. Snaps back into place with a satisfying click.
USB-C rechargeable
4-hour runtime per charge. Charges from any USB port — power bank, laptop, or wall adapter. Cable included.
3 color temperatures + dim
Tap the wood handle to cycle between 3000K warm, 4000K neutral, and 6000K cool. Hold to dim.
Where it works best
Hallway nightlightLate-night bathroom trips, sleeping pets, kids' rooms
Closet interiorStick to closet door — no wiring through cabinetry
Bedside accentWall-mounted above a nightstand; detach for handheld use
Rental-friendlyAdhesive mount option leaves no holes; takes 5 minutes to install
Stairway / entrywayTwo together for symmetric ambient light without wired conduit
Emergency backupAlways charged on the wall; grab during power outageConfigurationTouch control on the wood handle
Single tap = on/off. Double tap = cycle color temperature. Long press = dim from 100% down to 10%.
Mount: screw or adhesive
Wall plate mounts with 2 screws (drywall anchors included) or via 3M VHB adhesive strip (included). Adhesive holds 1+ lb.
FinishWalnut woodLight woodWhite diffuser (fixed)
| Dimensions |
Ø1.0″ × 7.1″ tall (2.5 × 18 cm) · wall plate Ø3.5″ |
| Material |
Walnut or light wood handle and wall plate · metal internal frame · frosted acrylic diffuser |
| Light source |
Integrated LED — 1W, ~80 lumens |
| Color temperature |
3000K warm · 4000K neutral · 6000K cool — switchable via touch |
| Battery |
Built-in rechargeable lithium-ion · ~4-hour runtime per charge |
| Charging |
USB-C (cable included) — ~2.5 hours to full charge |
| Mounting |
Screws (drywall anchors included) or 3M VHB adhesive (included) |
| Control |
Touch sensor on the wood handle — tap, double-tap, hold |
| Body finish |
Walnut wood (dark) or Light wood — choose at checkout |
| Certification |
Certified for North America, EU, Australia, and Saudi Arabia |
| Warranty |
1 year on battery · 2 years on LED and fixture |
Setup & Use
-
Screw mount: Hold the wall plate where you want it, mark the two screw points with a pencil, drill pilot holes, install drywall anchors if needed, then screw the plate to the wall. Snap the lamp onto the magnet.
-
Adhesive mount: Clean the wall with isopropyl alcohol, peel the backing from the 3M VHB strip on the plate, press firmly for 30 seconds. Wait 2 hours before attaching the lamp.
- Charge for 2.5 hours before first use. Subsequent charges take similar time. Keep charged for emergency-light reliability.
- Indoor dry locations only. Not for bathrooms with direct shower spray or outdoor use.
FAQs
