A flush mount ceiling light with a pleated stretch-fabric shade shaped into overlapping petal segments — the fabric pulls and gathers at the center, creating natural tension folds across the surface that catch light differently at different angles. The center cap is turned solid walnut with a brass-tone hardware fastener — a small material detail visible from below that keeps the fixture grounded in warm, furniture-grade materials. At H 5.9″ / 15cm the profile sits close to the ceiling and works in standard 8 ft / 2.4 m rooms without any drop. Integrated LED — no bulb required. Three sizes: Ø 15.7″ (22W), Ø 19.7″ (32W), and Ø 23.6″ (48W).
Light On & Light Off×
Unlit, the pleats read as soft texture; lit, the fabric glows evenly from within · tap to enlarge
Integrated LED panel — no bulb required
The LED light source is an SMD panel built into the fixture, so no separate bulb is needed. Rated LED lifespan is typically 25,000+ hours under normal use.
Hardwired ceiling install — flush mount
This fixture hardwires directly to the ceiling junction box. It is not plug-in. A licensed electrician is recommended. Turn off power at the breaker before installation. Confirm your ceiling box is positioned at the correct location — flush mount fixtures cannot be repositioned after hardwiring.
Features
Pleated stretch fabric
Stretch fabric pulled into overlapping petal segments — the material gathers at the center and fans outward, creating natural tension folds that shift in appearance under different light angles.
Integrated LED · no bulb
An SMD LED panel is built into the fixture — no bulb to source or install. Restore power at the breaker after installation and it is ready.
Solid walnut center · H 5.9″
A turned walnut cap with a brass-tone fastener closes the center of the shade. At H 5.9″ / 15cm, the profile stays close to the ceiling and suits standard room heights.
Size at a Glance
| Size |
Dimensions |
Wattage |
Room coverage |
Best for |
| Small |
Ø 15.7″ x H 5.9″ / Dia 40cm x H 15cm |
22W |
108–140 sq ft / 10–13 m² |
Bedroom, study, hallway, compact living room |
| Medium |
Ø 19.7″ x H 5.9″ / Dia 50cm x H 15cm |
32W |
140–172 sq ft / 13–16 m² |
Bedroom, dining area, living room, open study |
| Large |
Ø 23.6″ x H 5.9″ / Dia 60cm x H 15cm |
48W |
172–194 sq ft / 16–18 m² |
Living room, dining room, primary bedroom, open-plan space |
Small×Medium×Large×
Tap any diagram to enlarge
ConstructionStretch fabric shade · solid walnut center cap · brass-tone hardware · metal frame
The shade is constructed from stretch fabric pulled over a metal petal-segment frame. Each segment fans outward from the center, and the tension in the fabric creates natural gather lines across the surface — not printed or embossed, but physically formed by how the fabric sits under tension. The center is capped with a solid walnut turned disc, finished with a small brass-tone fastener. Off-white fabric against walnut brown keeps the palette warm and neutral. The metal frame mounts flush to the ceiling junction box.
Light SourceIntegrated SMD LED panel · 22W / 32W / 48W
An SMD LED panel sits inside the fixture — 22W for the Small, 32W for the Medium, and 48W for the Large. It diffuses light evenly across the stretch fabric from behind, lighting the gather folds from within. As an integrated light source, there is no socket and no bulb to change.
| Material |
Stretch fabric shade · solid walnut center cap · metal frame · brass-tone hardware |
| Body Finish |
Walnut center cap · brass-tone hardware |
| Shade Finish |
Off-white stretch fabric |
| Sizes |
Small: Ø 15.7″ x H 5.9″ / Dia 40cm x H 15cm
Medium: Ø 19.7″ x H 5.9″ / Dia 50cm x H 15cm
Large: Ø 23.6″ x H 5.9″ / Dia 60cm x H 15cm |
| Light source |
Integrated SMD LED panel |
| Wattage |
Small: 22W · Medium: 32W · Large: 48W |
| Color temperature |
Warm white 3000K |
| Voltage |
AC 110–240V |
| Control |
Wall switch |
| Mounting |
Flush mount · hardwired to ceiling junction box |
| Room coverage |
108–194 sq ft / 10–18 m², depending on size |
| IP rating |
IP20 — indoor, dry locations only |
| LED lifespan |
25,000+ hours |
| Certification |
Compatible with North America, Saudi Arabia, Europe, Australia Certification |
Default configuration
Select size at checkout. Single colorway: walnut + off-white fabric. for trade or bulk pricing.
Installation & Care
- Turn off power at the breaker before installation. A licensed electrician is recommended for all hardwired ceiling connections. Confirm the junction box position suits the room layout before hardwiring, as the fixture cannot be repositioned afterward.
- The LED panel is built in — no bulb assembly is required. After installation, restore power at the breaker and the fixture is ready to use.
- Stretch fabric shade: dust with a soft brush or low-suction vacuum brush attachment. Do not wet-clean, iron, or steam — heat and moisture can distort the tension folds. Not for bathrooms or other humid rooms.
- Solid walnut center cap: wipe with a dry cloth only. Avoid water and oil-based polish, which can darken or strip the wood finish. Brass-tone hardware fastener: dry cloth only.
- Metal frame: dry microfiber cloth. Avoid liquid cleaners and abrasive pads.
Downloads & Resources
FAQs
Sizing &
Here is what most clients ask before choosing theirs.
