Verella Cast Resin Wall Sconce

Verella Cast Resin Wall Sconce

A solid block of cast resin — recessed at the center to a thinner panel where the integrated LED can shine through, rounded at the edges into a smooth pillow form that holds the texture of the casting mold. Two slim metal clips secure it to the wall, top and bottom, leaving the resin floating between them. When the LED is on, the recessed center glows from within: a vertical column of warm light pushing through the textured surface, diffused but unmistakable. The 20.5 × 31.5 cm scale fits either side of a mirror, a single statement wall, or a sequence along a hallway. Available in six colorways — two resin tones paired with brushed nickel, two with graphite, and two with brushed brass.

Cast Resin Plaque

Solid hand-cast block — ~5 kg of resin per piece, surface texture left as it came out of the mold.

Lit Inner Field

The center is recessed and translucent — the integrated LED glows through a softer, thinner section of the resin.

Six Colorways

Six resin tones — blue, green, gray, orange, tea, amber — each paired with one of three metal finishes.

The plaque is solid hand-cast resin. The textured surface, color depth, and translucency are all engineered into the casting process. This is the correct material for the look — natural alabaster cannot be tinted into colors like blue or green, and glass cannot be cast with this kind of raw textured face. It is heavier and warmer-feeling than acrylic, but it is resin, not stone.

Lamp Body: Available in Matte Sand Gold, Black Antique Bronze, Natural Copper, and Satin Nickel.

The Verella mounts to a standard US wall junction box and wires into your home's 110–240V supply. We recommend a licensed electrician for installation; estimate 20–30 minutes per fixture for an experienced installer.

Six colorways

Blue

Cool blue resin with warm brass hardware — the highest-contrast pairing of the six.

Green

Translucent green resin with darker graphite hardware — the most architectural of the six.

Gray

Neutral gray resin with graphite hardware — reads as a single dark object during the day.

Orange

Saturated orange resin with warm brass hardware — the boldest of the six, best as a single statement piece.

Tea

Smoky tea-brown resin with cool nickel hardware — warm resin against cool metal, balanced and easy to place.

Amber

Warm amber resin with cool nickel hardware — the most classic combination, suits transitional and modern rooms.

Light

3000K Warm White · 14W Integrated LED

14W of warm white at 3000K — calibrated to flatter the warm resin tones (orange, tea, amber) and to keep the cooler tones (blue, green, gray) from going clinical.

Dimensions

Installation

• Hardwired install. Mounts to a standard US wall junction box; licensed electrician recommended.
• Turn off power at the breaker before opening the existing junction box. Verify with a voltage tester.
• Connect black to black (line), white to white (neutral), and ground to the green or bare copper wire from the box.
• The fixture weighs 5.35 kg / 11.8 lb. Use the supplied hardware into a junction box anchored to a stud or rated for fixture weight; do not mount into drywall alone.
• For indoor use only. Not suitable for bathrooms, outdoor, or other damp locations.

Downloads

Frequently asked