A hand-carved gypsum-resin flush mount from the Victorian Series — each unit individually sculpted, sanded, and finished before the Ø11 cm opal glass globe is fitted at the center. Two silhouettes: the Bouquet clusters layered petals and leaves in a loose, gathered arrangement around the globe; the Floral Crown is a single large bloom with deep radial ridges, more architectural in its symmetry. Three finishes — Ivory White, Matte Black, and Gilded Gold — are each applied by hand after carving. Because every piece is hand-finished, surface micro-texture varies slightly between units. G9 socket, 12W. All six variants are ceiling flush-mount with no pendant drop.
G9 socket — not E26 or E27
This fixture uses a G9 bi-pin socket — a small two-pin base common in European decorative lighting, distinct from the E26 (North America) or E27 (worldwide) screw base used in most pendant lamps. G9 LED capsule bulbs (12W) are available at specialty lighting retailers and online. Confirm bulb availability in your market before ordering. G9 bulbs are not interchangeable with E26 or E27.
Hardwired ceiling install — flush mount · no pendant drop
This fixture hardwires directly to the ceiling junction box. It is not plug-in. A licensed electrician is recommended. Turn off power at the breaker before installation. The Ø18 cm base plate mounts flush to the ceiling.
Hand-carved artisan piece — surface micro-texture is inherent
Each fixture is individually hand-carved and hand-sanded from gypsum-resin composite. Minor surface marks, texture variation, and small imperfections are an expected characteristic of hand-finished work and are not considered manufacturing defects. If surface perfection is a priority, review the product photography carefully before ordering.
Features
Hand-carved gypsum-resin
Gypsum-resin composite is individually hand-carved and sanded — the surface detail in the petals, veins, and leaf edges comes from the carving process, not a mold stamp. Each unit carries the marks of the craftsperson who finished it.
Ø11 cm opal glass globe
A frosted opal glass ball globe (Ø11 cm) sits at the center of the carved surround — it diffuses the G9 light into a soft, even glow. The globe is a fixed element of the design and is not sold separately.
3 finishes · 2 silhouettes
Ivory White, Matte Black, and Gilded Gold — each applied by hand after carving. Two silhouettes: Bouquet (X-80202) and Floral Crown (X-80201). All six combinations are available.
Select Your Variant
Silhouette
Finish
Ivory WhiteMatte BlackGilded GoldBouquet · Ivory White — X-80202
Body: Ø29 × H19 cm (11.4″ × 7.5″) · Base plate: Ø18 cm · Globe: Ø11 cm
Finish: hand-carved and sanded, ivory white — a matte warm off-white with subtle surface texture
Suits: bedroom · hallway · walk-in closet · powder room · compact entryway. Ivory reads softest under warm light.
Two Silhouettes at a Glance
| Silhouette |
Model |
Body size |
Carving style |
| Bouquet |
X-80202 |
Ø29 × H19 cm
11.4″ × 7.5″ |
Multiple layered petals and leaves gathered loosely — organic, asymmetric floral cluster around the globe |
| Floral Crown |
X-80201 |
Ø30 × H20 cm
11.8″ × 7.9″ |
Single large bloom with deep radial ridges radiating from center — more architectural and symmetrical than the Bouquet |
G9 Socket — What You Need to KnowG9 bi-pin · 12W · not E26/E27 · confirm bulb availability in your market
G9 is a bi-pin socket — a small two-pin ceramic base used widely in European decorative ceiling fixtures. It is physically incompatible with E26 or E27 screw base bulbs. G9 LED capsule bulbs (12W) are available at specialty lighting retailers, home improvement stores, and online. In North America they are less common than E26 but widely stocked online. Confirm whether the bulb is included (see spec below) and whether G9 12W LEDs are available locally before ordering. For dimming, confirm the fixture's driver is compatible with Triac or trailing-edge LED dimmers, and use a G9 LED capsule rated for dimming.
Craft & MaterialGypsum-resin composite · hand-carved · hand-sanded · hand-finished in three colorways
Gypsum-resin composite combines the fine surface detail of plaster casting with the structural durability of resin. Each fixture is hand-carved after initial casting — the carving step adds the fine edge definition in petal veins, leaf margins, and surface shadow lines that casting alone cannot achieve. It is then hand-sanded to a consistent surface before the finish is applied. Ivory White is a matte warm off-white with a subtle surface grain. Matte Black is a flat deep black — in low ambient light the carving reads as shadow relief. Gilded Gold uses a layered gilding technique that leaves warm variation across the carved surface rather than a uniform metallic coat.
Dimensions××
🔍 Dimensions — tap to enlarge
Victorian Series Flush Mount Specs
| Light source |
G9 bi-pin · 12W · 1 socket per fixture · CONFIRM if bulb is included |
| Globe shade |
Opal frosted glass · Ø11 cm · fixed (not removable) |
| Silhouettes |
Bouquet (X-80202): Ø29 × H19 cm (11.4″ × 7.5″)
Floral Crown (X-80201): Ø30 × H20 cm (11.8″ × 7.9″) |
| Base plate |
Ø18 cm — shared across both silhouettes |
| Finishes |
Ivory White · Matte Black · Gilded Gold (3 options per silhouette) |
| Material |
Gypsum-resin composite (hand-carved and hand-sanded) · opal glass globe |
| Craft |
Hand-carved · hand-sanded · hand-finished colorway |
| Mounting |
Flush mount · hardwired · no pendant drop · Ø18 cm base plate |
| Input voltage |
CONFIRM BEFORE PUBLISHING — confirm 110–240V or 220–240V only |
| IP rating |
IP20 — indoor, dry locations only (confirm with supplier) |
| Dimmable |
CONFIRM BEFORE PUBLISHING — depends on G9 driver specification |
| Best for |
Bedroom · hallway · powder room · walk-in closet · entryway · reading corner · French country · grandmillennial · maximalist · transitional interiors |
Default configuration
Select silhouette and finish at checkout. Custom colorways available — to discuss. Trade and bulk pricing available on request.
Installation & Care
- Turn off power at the breaker before installation. A licensed electrician is recommended for all hardwired ceiling connections. The Ø18 cm base plate mounts directly to the junction box.
- Insert a G9 12W LED capsule bulb into the G9 socket. G9 is a bi-pin socket — the two pins slide into the socket and twist to lock. Do not attempt to use an E26 or E27 bulb — the sockets are physically incompatible.
- If dimming is required: confirm the internal driver supports LED dimming (Triac or trailing-edge) and use a G9 LED capsule rated for dimming. A non-dimmable driver on a dimmer circuit may flicker or buzz.
- Gypsum-resin body: dust with a soft dry brush or a low-suction vacuum brush attachment. Work carefully around the carved edges, which can accumulate dust in the shadow lines. Do not wet-clean — water softens gypsum-resin composite and can damage the surface finish and carved detail. Do not use abrasive cleaners, solvents, or polish.
- Opal glass globe: wipe with a soft dry or slightly damp cloth when the fixture is off and fully cooled. Dry immediately — do not leave moisture on the glass.
- Gilded Gold finish: handle the body with care — the gilded surface is sensitive to oils from skin contact. Avoid gripping the carved face directly; hold from the base plate during installation. Light cleaning with a dry, soft cloth only.
- The fixture is a hand-finished artisan piece — surface micro-texture and minor variation in the carved surface between units is inherent to the production process. This is not a defect.
Downloads & Resources
FAQs
