Cone Swing-Arm Wall Sconce —
Articulated Directional IlluminationA swing-arm wall sconce with a small cone shade and a discreet pull-cord switch—finished in glossy painted iron across the shade, arm, and slim baseplate. The articulated arm extends in two segments (30 + 20 cm), so the cone can sit close against the wall or reach about 20″ (50 cm) into the room as a directional reading light beside a bed, sofa, or armchair. ∅ 25 cm shade, hardwired to a standard junction box behind a 6 × 25 cm rectangular baseplate. Available in two colors: Pomegranate Red or Tangerine Orange. One E27 socket; bulb sold separately.
Key Highlights
Two-Segment Swing Arm
30 + 20 cm articulated arm—fold flat against the wall or swing out to about 50 cm reach.
Cone Shade + Pull Cord
Compact cone with a thin pull-cord switch hanging from the side—no wall switch required.
Painted Iron, Two Colors
Glossy enamel finish across shade, arm, and baseplate in Pomegranate Red or Tangerine Orange.
Color Finishes
Pomegranate RedDeep burgundy red
Tangerine OrangeVibrant warm orange
Available in two distinct finishes: Pomegranate Red (deep wine/burgundy tone) and Tangerine Orange (vibrant warm citrus). Swatches are digital approximations; actual painted iron may shift slightly with room lighting.
E27 Bulb Sold Separately
The cone shade conceals one standard E27 socket. The bulb is not included so you can match your preferred color temperature. We recommend a warm-white LED at 2700–3000K, around 400–600 lumens for a reading-light feel, in a standard A-shape bulb up to 40W equivalent.
Two-Segment Articulated Arm Mechanics
The arm is built from two segments: a 30 cm inner section hinged at the baseplate, and a 20 cm outer section hinged where the cone attaches. Each joint pivots independently, holding its position through calibrated friction. Adjust gently by hand without forcing past the natural travel range.
Integrated Pull-Cord Switch
A thin braided pull-cord hangs from the side of the cone shade. A short tug toggles power directly at the fixture, making it ideal beside a bed, in a reading corner, or in spaces lacking convenient wall switch wiring.
Enamel Painted Iron Finish & Custom Orders
Each sconce is welded from iron tubing and sheet, then finished in durable glossy enamel paint. For project quantities or a bespoke color request, please before ordering.
Product Size
| Component |
Metric Dimensions |
Imperial Dimensions |
| Cone Shade |
Dia 25cm × H 19cm |
∅ 9.8″ × H 7.5″ |
| Wall Baseplate |
W 6cm × L 25cm |
W 2.4″ × L 9.8″ |
| Articulated Arm |
L 30cm + 20cm (~50cm reach) |
L 11.8″ + 7.9″ (~19.7″ reach) |
Dimension Diagrams Click thumbnail to zoom
| Shade Dimensions |
∅ 9.8″ × H 7.5″ (∅ 25 × H 19 cm) |
| Baseplate |
W 2.4″ × L 9.8″ (W 6 × L 25 cm) |
| Arm |
L 11.8″ + 7.9″ (L 30 + 20 cm) · Two-segment articulated · ~50 cm max reach |
| Colors |
Pomegranate Red · Tangerine Orange |
| Material |
Welded iron tubing and sheet · Glossy enamel paint |
| Light Source |
1 × E27 socket · Bulb sold separately · Max 40W equivalent |
| Switch |
Pull-cord on shade · No wall switch required |
| Voltage |
AC 110–240V (120V compatible) |
| Mounting |
Hardwired to standard wall junction box · Indoor dry locations |
| Suitable Spaces |
Bedside, reading nook, hallway, beside sofa or armchair, guest room |
| Certification |
Compatible with North America, CE, SAA, SASO, KC Certification |
Setup Notes
- Hardwired to a standard wall junction box behind the baseplate—we recommend a licensed electrician for installation.
- Plan mount height so the pull-cord hangs within easy reach when seated or standing (typically 130–150 cm from floor).
- Allow clearance for the swing arm: approx. 50 cm outward reach plus the cone's 25 cm diameter.
- Unpack carefully—lift the sconce by the baseplate or arm hinge, avoiding pulling by the shade or pull-cord.
- Install one E27 bulb up to 40W equivalent—a warm-white LED at 2700–3000K, 400–600 lumens suits reading use.
- Indoor dry locations only—not rated for bathrooms with steam exposure, covered porches, or outdoor use.
- Adjust the two arm segments by hand; joints hold position through friction without forcing past natural travel range.
- Wipe the painted finish with a soft, dry cloth. The pull-cord can be wiped with a slightly damp cloth and dried promptly.
Downloads & Resources
